{"id":5143,"date":"2026-09-30T04:35:47","date_gmt":"2026-09-30T04:35:47","guid":{"rendered":"https:\/\/www.relyirgrass.com\/panoramic-padel-court-design-guide\/"},"modified":"2026-11-02T06:59:42","modified_gmt":"2026-11-02T06:59:42","slug":"panoramic-padel-court-design-guide","status":"publish","type":"post","link":"https:\/\/www.relyirgrass.com\/de\/panoramic-padel-court-design-guide\/","title":{"rendered":"Planung eines kompletten Panorama-Padel-Courts: Ein Leitfaden"},"content":{"rendered":"<style>\nh2 { font-size: 1.6em; line-height: 1.3; margin: 40px 0 18px; }\nh3 { font-size: 1.2em; line-height: 1.35; margin: 26px 0 12px; }\np { line-height: 1.8; margin-bottom: 28px; }\ntable { display: table !important; width: 100% !important; border-collapse: collapse; margin-bottom: 28px; }\nth { text-align: left; padding: 12px 14px; background: #1a5c2e; color: #ffffff; font-weight: 600; }\ntd { padding: 12px 14px; border-bottom: 1px solid #e5e5e5; vertical-align: top; }\nfigcaption { text-align: center; font-style: italic; }\n.callout-note { border-left: 4px solid #1a5c2e; background: #f3f7f2; padding: 18px 22px; margin: 28px 0; border-radius: 4px; }\n.callout-warning { border-left: 4px solid #b8860b; background: #fdf7e8; padding: 18px 22px; margin: 28px 0; border-radius: 4px; }\n<\/style>\n<p>Two quotations for the same panoramic padel court can look identical on signing day and still lead to different courts three years later. The difference hides in specification rows nobody reads at the table. Glass thickness, corner-joint tolerance, steel grade, fastener material, lighting tiers and the drainage build-up all decide the operating bill. So does the turf-and-sand pairing underfoot. None of these rows is exotic; all of them are accept-or-reject decisions.<\/p>\n<p>Most published pages answer with a type menu or a parts table. This page takes the specification-desk view instead. A court decomposes into five subsystems: glass walls, steel frame, lighting, base and drainage, and surface turf. Each one carries a baseline spec, a few selection knobs and a set of acceptance documents. We sit on the manufacturing side of the last subsystem, and we spend every day reading the rows buyers should demand before the deposit.<\/p>\n<h2 id=\"why-the-panoramic-layout-changes-the-design-brief\">Why the Panoramic Layout Changes the Design Brief<\/h2>\n<p>Start with what does not change. The playing system of a panoramic padel court is the same 20-by-10 rectangle every club knows. The enclosure stays recognisable too: <a href=\"https:\/\/en.wikipedia.org\/wiki\/Padel\" target=\"_blank\" rel=\"noopener\">walls of glass or brick plus fences<\/a> ring the court at 3 to 4 metres high, per the sport&#8217;s encyclopedia entry. Glass panels usually form the back walls and adjacent corner sections, while metal mesh fills the remaining sides.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot1-large-glass-panels.webp\" data-img-slot=\"1\" width=\"1200\" height=\"728\" alt=\"Close-up of glass facade panels with slim frames and sky reflections\" class=\"wp-image-5114\" loading=\"lazy\" srcset=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot1-large-glass-panels.webp 1200w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot1-large-glass-panels-300x182.webp 300w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot1-large-glass-panels-1024x621.webp 1024w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot1-large-glass-panels-768x466.webp 768w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot1-large-glass-panels-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><figcaption>The playing system did not change &#8211; the architecture behind the glass did.<\/figcaption><\/figure>\n<p>What changes is the load-bearing architecture behind the glass. A classic build leans on corner posts carrying a double-beam frame. Per one court engineering guide, the panoramic system redistributes load through main posts of 100x100x3 mm, intermediate columns of 100x50x3 mm and a sixteen-span crossbeam grid. The corners stop carrying load, so the posts that once sat there disappear from the drawing and their work moves into the frame. Every wall panel therefore sits in a continuous plane, and every fixing behind it becomes a specification row rather than a catalogue line.<\/p>\n<p>Naming adds noise, not substance: panoramic, full panoramic and ultra differ mainly in how far the posts are deleted. A standard panoramic keeps corner posts and about 18 glass panels, per one court engineering guide, while a full panoramic deletes them for continuous glass-to-glass corners with 22-26 panels. The type menu itself belongs to another article. What stays fixed across every naming variant is <a href=\"https:\/\/www.relyirgrass.com\/padel-court-dimensions-and-size\/\">the 20-by-10 playing area and its clearances<\/a>, so we treat dimensions as constants. The design effort goes into the five subsystems behind the glass instead.<\/p>\n<p>That is the reframing this guide applies throughout. A panoramic padel court brief is not a choice among wall types. It is a chain of five verifiable specification decisions: glass, steel frame, lighting, base and drainage, and surface turf. The sequence matters, because each subsystem constrains the next. Each subsystem below therefore ends with the same question: which document proves this row was built as specified?<\/p>\n<h2 id=\"glass-walls-thickness-panels-and-safety-choices\">Glass Walls: Thickness, Panels and Safety Choices<\/h2>\n<p>Glass is where a panoramic padel court earns its name, and it is where budget tenders fail first. The glass is not a fence around the game; it is part of the playing surface, absorbing high-velocity ball impacts every rally. Per one materials guide, 12 mm tempered glass is the industry standard thickness, and anything thinner is described as a liability for exactly that reason. Treat the thickness row as the first number to verify against the delivery documents, not the drawing.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot2-close-up-glass.webp\" data-img-slot=\"2\" width=\"1200\" height=\"799\" alt=\"Teal glass facade panels with visible seams and joints\" class=\"wp-image-5115\" loading=\"lazy\" srcset=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot2-close-up-glass.webp 1200w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot2-close-up-glass-300x200.webp 300w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot2-close-up-glass-1024x682.webp 1024w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot2-close-up-glass-768x511.webp 768w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot2-close-up-glass-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><figcaption>Twelve millimetres, tempered &#8211; the baseline every specification starts from.<\/figcaption><\/figure>\n<p>The safety logic is materials science, not marketing. Tempering heats the panel to about 620 C and then cools it rapidly, leaving the surface in compression. The treatment makes the glass roughly 4-5 times stronger than annealed sheet of the same thickness, per one materials guide. When it does break, tempered glass tends to <a href=\"https:\/\/en.wikipedia.org\/wiki\/Tempered_glass\" target=\"_blank\" rel=\"noopener\">shatter into small granular chunks<\/a> instead of splintering into large jagged shards. That behaviour is what makes panels players lean into and play off acceptable in the first place.<\/p>\n<table>\n<tr>\n<th>Glass option<\/th>\n<th>Relative strength<\/th>\n<th>Break behaviour<\/th>\n<th>Best fit<\/th>\n<\/tr>\n<tr>\n<td>12 mm tempered<\/td>\n<td>Baseline; 4-5x the strength of annealed glass<\/td>\n<td>Breaks into small granular pieces, not sharp shards<\/td>\n<td>The default wall specification for a panoramic build<\/td>\n<\/tr>\n<tr>\n<td>10 mm tempered<\/td>\n<td>Thinner section with less impact reserve<\/td>\n<td>Same granular pattern, higher spontaneous-breakage risk<\/td>\n<td>Rated marginal; a cost-driven downgrade, not a recommendation<\/td>\n<\/tr>\n<tr>\n<td>Laminated tempered<\/td>\n<td>Comparable panel strength plus an interlayer<\/td>\n<td>Fragments stay held by the interlayer after breakage<\/td>\n<td>High-traffic venues where panels must stay in place<\/td>\n<\/tr>\n<\/table>\n<h3>Corner Joints, Tolerance and Fixings<\/h3>\n<p>Geometry is where the panoramic premium concentrates. A standard panoramic wall line uses 18 tempered panels of about 2,000 x 3,000 mm each, per one court engineering guide. Where corners go post-free, the panels meet in engineered glass-to-glass joints that carry cantilevered loads. Installation tolerance tightens from about +\/-5 mm on a standard build to roughly +\/-1 mm at the joint, per one court engineering guide. Budget tenders fail here first, because a +\/-1 mm joint is a fabrication and assembly discipline, not a product photo.<\/p>\n<p>The fixings and the paperwork close the loop. Glass-panel connections should be specified with countersunk A4-grade stainless hardware rather than standard zinc-plated fixings, per one court engineering guide. Countersunk hardware also keeps the playing surface flush, because every fixing head sits where players and balls actually reach. For any post-free corner, the acceptance document to demand is a full structural engineering calculation for the joint detail. That single row separates a serious supplier from a catalogue reseller faster than any render.<\/p>\n<h2 id=\"steel-frame-posts-mesh-and-corrosion-protection\">Steel Frame: Posts, Mesh and Corrosion Protection<\/h2>\n<p>Behind every glass wall stands a steel skeleton that decides how the court ages. The panoramic post grid concentrates load deliberately. Per one court engineering guide, main posts of 100x100x3 mm anchor the frame, with intermediate columns of 100x50x3 mm between them and a sixteen-span crossbeam grid above. Fewer posts do not mean less engineering; they mean the same loads travel through fewer, better-chosen sections.<\/p>\n<p>Above the glass line, the enclosure continues in electrowelded mesh. Per one manufacturer spec sheet, the mesh runs 50x50x4 mm, with module frames of 40x40x2 mm tubing secured by 80x80x2 mm reinforcement posts on steel anchor plates. The structure meets its foundation through mechanical anchors of 12 mm diameter and 120 mm length, tightened to 110 Nm. Anchor plates and torque values are boring until a post moves; then they are the whole conversation. None of these numbers is exotic; every one of them belongs in the specification, row by row.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot3-corner-detail-powder.webp\" data-img-slot=\"3\" width=\"1200\" height=\"800\" alt=\"Stacked electrowelded steel wire mesh sheets in an industrial pile\" class=\"wp-image-5116\" loading=\"lazy\" srcset=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot3-corner-detail-powder.webp 1200w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot3-corner-detail-powder-300x200.webp 300w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot3-corner-detail-powder-1024x683.webp 1024w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot3-corner-detail-powder-768x512.webp 768w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot3-corner-detail-powder-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><figcaption>Three corrosion layers, one line each in the specification.<\/figcaption><\/figure>\n<h3>Steel Grade and the Three-Layer Corrosion Package<\/h3>\n<p>Steel grade is the first corrosion decision, not a cosmetic one. S355 steel yields at 355 MPa against 235 MPa for S235, per one court engineering guide, and it resists fatigue better under repeated wind and ball-impact loading. That is why post-free panoramic frames specify S355 as a minimum. The deleted posts move their work into the frame, and the frame material has to be up to it.<\/p>\n<p>The corrosion package then arrives as three rows a buyer can accept or reject line by line. Row one: hot-dip galvanizing, which immerses the steel in molten zinc at about 450 C so that zinc-iron alloy layers bond metallurgically to the surface, per one materials guide. Row two: a polyester powder coating applied electrostatically, taking the finish to 150-300 microns over the galvanizing. Row three: fastener grade, the row most often value-engineered away.<\/p>\n<p>Fasteners deserve their own line: galvanized ones show rust spotting at the threads within 12 to 24 months outdoors, per one materials guide. That is why stainless is specified for outdoor courts. A panoramic padel court is judged on its corner joints and fastener heads long before anyone inspects the crossbeams. Specify the package as three accept-or-reject rows, and every one of them stays a decision rather than an afterthought.<\/p>\n<h2 id=\"lighting-poles-output-and-structural-integration\">Lighting: Poles, Output and Structural Integration<\/h2>\n<p>Ask two suppliers what lights a panoramic padel court and you get two different answers to the same question. One manufacturer spec sheet lists eight 200 W LED fittings delivering 26,000 lumens. Another manufacturer&#8217;s sheet quotes the same eight 200 W fittings at 23,000 lumens, mounted in pairs on four poles at 6 m. Neither figure is wrong; each package was engineered for a different pole layout and mounting height. The gap between them is the point: fixture counts and lumen figures are design outputs, not constants.<\/p>\n<p>What is constant is the performance tier. Per the SAPCA code of practice, national and international competition targets 500 lux average with 0.7 uniformity. Regional competition, school, recreational and indoor use targets 300 lux at 0.5. Those two rows, not the lumen figure, are what a lighting acceptance test actually measures, so the tier belongs in the specification before any fixture schedule does.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot4-stadium-floodlight-tower.webp\" data-img-slot=\"4\" width=\"1200\" height=\"800\" alt=\"Floodlight tower with lamp bank lit against a twilight sky\" class=\"wp-image-5117\" loading=\"lazy\" srcset=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot4-stadium-floodlight-tower.webp 1200w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot4-stadium-floodlight-tower-300x200.webp 300w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot4-stadium-floodlight-tower-1024x683.webp 1024w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot4-stadium-floodlight-tower-768x512.webp 768w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot4-stadium-floodlight-tower-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><figcaption>Fixture counts are design outputs &#8211; the lux tier is the constant.<\/figcaption><\/figure>\n<p>Mounting method is the second constant. The SAPCA code recognises two: Method 1 extends the enclosure posts with brackets for one or two luminaires, and Method 2 places stand-alone columns outside the perimeter. A panoramic structure adds its own answer, because one court engineering guide notes that panoramic courts integrate lighting into the steel system for a unified appearance. That is tidy on site, but it means the lighting schedule and the steel schedule must be signed off together. Whichever method the drawing shows, the luminaires, their brackets and the posts they hang from all appear in the same structural calculation.<\/p>\n<p>Clear height closes the section. The playing surface needs 6 m kept free of obstacles such as lighting equipment. Indoor builds add their own floor: one court-build guide advises at least 7 m of warehouse clear height, with 9-10 m described as even better. Within those constraints the fixture market stays wide: LED fittings from 200 to 400 W at about 5000 K, on poles in several cross-section shapes, per one manufacturer spec sheet. Which is exactly why the tier, the method and the height come first.<\/p>\n<h2 id=\"base-and-drainage-under-the-court\">Base and Drainage Under the Court<\/h2>\n<p>Drainage is the subsystem the published pages forget, and it is where a court quietly loses booking days. Per one facility guide, a court can look impressive on opening day yet underperform within months when sand migrates, drainage runs weak or the base is not level. For a booking-driven venue, poor drainage damages availability and revenue long before the turf reaches technical end of life. None of this shows up in a photograph, which is exactly why it needs its own specification rows.<\/p>\n<p>The engineering picture is well documented in the industry&#8217;s code of practice. Surface water leaves a padel court by percolation through the porous construction: artificial grass over asphalt over graded aggregate. Per the SAPCA code of practice, a new court on virgin ground should be built with <a href=\"https:\/\/sapca.org.uk\/wp-content\/uploads\/2021\/03\/CoP_for_padel_courts_v3_040321.pdf\" target=\"_blank\" rel=\"noopener\">two asphalt layers for drainage, stability and regularity<\/a>. New builds may also be laid to a 1:100 gradient at formation level, so percolating water finds its way to the outfall. Porous surfaces should clear ponding within about 15 minutes of rain ceasing.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot5-porous-asphalt-base.webp\" data-img-slot=\"5\" width=\"1200\" height=\"900\" alt=\"Paving crew laying a fresh asphalt base layer on a construction site\" class=\"wp-image-5118\" loading=\"lazy\" srcset=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot5-porous-asphalt-base.webp 1200w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot5-porous-asphalt-base-300x225.webp 300w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot5-porous-asphalt-base-1024x768.webp 1024w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot5-porous-asphalt-base-768x576.webp 768w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot5-porous-asphalt-base-16x12.webp 16w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><figcaption>Water leaves by percolation &#8211; the base is the drainage system.<\/figcaption><\/figure>\n<p>The route out is just as specified. The perimeter drain normally runs at or below formation level along the lowest long side, per the SAPCA code, and discharges through the enclosure&#8217;s ring-beam foundation to an outfall. That makes <a href=\"https:\/\/www.relyirgrass.com\/padel-court-turf-surface-system\/\">how turf, sand and base work as one system<\/a> the right acceptance frame for the whole underside of the court. The carpet, the sand and the gradient below it form one drainage machine, not three separate purchases. Water that cannot leave the ring beam is water the venue stored by accident.<\/p>\n<p>Two flatness rows finish the base specification. Level differences should stay under 3 mm over any 3 m straightedge, with a 1 percent maximum transverse slope on surfaces without drainage, per one facility guide. One panoramic-specific warning belongs right beside them. A fully glass-enclosed perimeter means the drainage route and outfall must be fixed at foundation stage. Retrofitting later means cutting back into a sealed slab.<\/p>\n<h2 id=\"surface-turf-specifying-the-playing-carpet\">Surface Turf: Specifying the Playing Carpet<\/h2>\n<p>Here the voice changes, because the playing carpet is the one subsystem we manufacture. Per the SAPCA product specification, the surface should be a single-tone sand-dressed or sand-filled grass. The acceptance rows read: pile height 10-15 mm, dtex 9,000-10,000, monofilament preferred with fibrillated acceptable, silica sand infill, and a stitch density of 40,000-60,000. Backing follows the same table: polypropylene primary, latex secondary. Those rows are not vendor marketing; they are the band a sample either meets or does not.<\/p>\n<p>Density is the knob that maps the carpet to the venue. Per one materials guide, about 40,000 stitches per square metre suits indoor or light recreational use. About 52,000 fits club-level daily play, and 63,000 is the premium tier for tournament and high-traffic commercial venues. Read the tiers as usage bands, not quality ranks: a 63,000-stitch carpet on a lightly booked court is money spent on rows the venue will never test. Each tier exists because a venue&#8217;s booking calendar, not the catalogue, defines how many fibres a square metre must carry.<\/p>\n<h3>Feel, Polymers and the Sand Discipline<\/h3>\n<p>Feel comes from two further knobs. A 10 mm textured turf is the version used in official tournaments, improving player traction per one court-build guide, while 12 mm monofilament is the durable standard across models. The monofilament preference has a materials logic behind it. Sports turf is commonly built on polyethylene, polypropylene or polyamide yarns, and monofilament PE construction holds its shape and its sand differently from a fibrillated sheet. For a panoramic padel court, which shows every square metre of carpet through the glass, the surface choice is visible as well as playable.<\/p>\n<p>Sand discipline ties the carpet back to the rest of the build. Per one facility guide, sand must keep working inside the pile. When sand accumulates loose on the surface instead of stabilising the fibres, the court can start to feel like an ice rink. That is why pile height, density and sand specification are decided together, not in three separate line items from three separate vendors.<\/p>\n<p>If the numbers above feel dense, our tutorial on <a href=\"https:\/\/www.relyirgrass.com\/padel-court-turf-specifications\/\">how to read a padel turf spec sheet<\/a> walks the rows one by one before you compare quotations. It is the same checklist we use internally before a quotation leaves the desk.<\/p>\n<div class=\"cta-box\" style=\"background-color:#1a2b3c;border-radius:6px;padding:30px;margin:35px 0;\">\n<h3 style=\"color:#ffffff;margin-top:0;\">Worried the Turf Spec Won&#8217;t Match Your Court Design?<\/h3>\n<p style=\"color:#ffffff;\">Our turf is made to your spec &#8211; pile height, density, Dtex, colour, backing and roll size &#8211; straight from our own production line. See the padel turf range.<\/p>\n<p><a href=\"https:\/\/www.relyirgrass.com\/sports-artificial-grass\/padel-turf\/\" style=\"display:inline-block;background-color:#1a5c2e;color:#ffffff;padding:12px 24px;border-radius:4px;text-decoration:none;font-weight:600;\">See the Padel Turf Range<\/a><\/p>\n<\/div>\n<h2 id=\"the-design-decision-chain-from-site-to-spec-sheet\">The Design Decision Chain from Site to Spec Sheet<\/h2>\n<p>Order is the part of a court specification nobody prints, so we will state ours plainly: this chain is our synthesis, and its steps are not swappable. Step one is site and climate, because it decides everything structural. Where sustained winds exceed 80 km\/h (Beaufort Force 9), mesh side walls become an engineering requirement rather than a preference. A wind study should be obtained before glass walls are specified at all, per one court engineering guide. Indoor projects check a different floor instead: at least 7 m of clear warehouse height, with 9-10 m described as even better.<\/p>\n<p>Step two is the structural layout &#8211; how far the corner posts go. Unless the brief explicitly demands post-free corners, one court engineering guide rates a standard panoramic layout at roughly 95 percent of the full-panoramic visual impact. The savings arrive as significantly lower cost and installation risk. Treat it as a budget-and-risk question, not an aesthetic one. The same scoping logic applies when choosing turf for a padel stadium, where the usage profile drives the surface tier before anything visual gets decided.<\/p>\n<p>Steps three to five follow the subsystems above: corrosion as line items, lighting by method, tier and clear height, turf and sand by density and competition level. Written down this way, a panoramic padel court specification stops being a package negotiation and becomes a checklist with a defined order. Write the chain into the tender itself, so every bidder prices the same sequence instead of hiding assumptions in a package price. Reverse the order &#8211; aesthetics first, site last &#8211; and every later row inherits an unexamined assumption.<\/p>\n<h2 id=\"what-goes-in-the-specification-pack\">What Goes in the Specification Pack<\/h2>\n<p>Everything above converges on a single artefact: the specification pack you demand before the deposit. Ours is a five-part document set, and none of it is optional. Steel: the grade and section schedule, so S355 is a named row rather than a sales adjective. Glass: tempering documentation, plus structural engineering calculations for any post-free corner joint. Each part has an owner on the supplier side and a matching row on the acceptance sheet.<\/p>\n<p>Corrosion: coating thickness reports, so the protective package is measured rather than promised. Lighting: lux and uniformity calculations for the chosen usage tier, not a lumen slogan. Turf: the five rows of pile height, dtex, stitch density, backing and sand spec, which we fill from our own production line in roll widths matched to the court plan. Ask for each part as a named document with a revision number and a date.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot6-printed-specification-sheets.webp\" data-img-slot=\"6\" width=\"1200\" height=\"800\" alt=\"Printed specification sheets and technical drawing on a desk\" class=\"wp-image-5119\" loading=\"lazy\" srcset=\"https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot6-printed-specification-sheets.webp 1200w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot6-printed-specification-sheets-300x200.webp 300w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot6-printed-specification-sheets-1024x683.webp 1024w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot6-printed-specification-sheets-768x512.webp 768w, https:\/\/www.relyirgrass.com\/wp-content\/uploads\/2026\/09\/panoramic-padel-court-design-guide-slot6-printed-specification-sheets-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><figcaption>The premium is a spec sheet where every row has a name signed against it.<\/figcaption><\/figure>\n<p>The habit this builds is contractual. When a supplier signs each row, the premium on a panoramic court stops being two extra glass panels. It becomes a spec sheet where every row has a name signed against it, and that is something you can audit. That is the difference between a court that photographs well on opening day and one that still plays to its specification seasons later. A buyer who collects this pack early never has to negotiate it late.<\/p>\n<p><!-- relyirgate:C1 --><\/p>\n<h2 id=\"frequently-asked-questions\">Frequently Asked Questions<\/h2>\n<div class=\"faq-card\" style=\"background:#f9f9f9;border-left:4px solid #1a5c2e;border-radius:4px;padding:25px;margin-bottom:18px;\">\n<h3 style=\"color:#1a5c2e;margin-top:0;\">How many floodlights does a panoramic padel court need?<\/h3>\n<p>Typically eight 200 W LED fittings, with published packages quoting 23,000 to 26,000 total lumens depending on the project. Performance tiers matter more than counts: 500 lux average for competition and 300 lux for recreational use, per the SAPCA code.<\/p>\n<\/div>\n<div class=\"faq-card\" style=\"background:#f9f9f9;border-left:4px solid #1a5c2e;border-radius:4px;padding:25px;margin-bottom:18px;\">\n<h3 style=\"color:#1a5c2e;margin-top:0;\">What glass thickness should a panoramic padel court use?<\/h3>\n<p>Twelve-millimetre tempered glass is the industry standard. Ten-millimetre panels are rated marginal and represent a downgrade, while laminated tempered glass suits high-traffic venues because its interlayer holds fragments after impact.<\/p>\n<\/div>\n<div class=\"faq-card\" style=\"background:#f9f9f9;border-left:4px solid #1a5c2e;border-radius:4px;padding:25px;margin-bottom:18px;\">\n<h3 style=\"color:#1a5c2e;margin-top:0;\">Do panoramic courts still have corner posts?<\/h3>\n<p>A standard panoramic court keeps them, using about 18 glass panels. A full panoramic court deletes the corner posts entirely, replacing them with engineered glass-to-glass joints that carry cantilevered loads on a heavier frame.<\/p>\n<\/div>\n<div class=\"faq-card\" style=\"background:#f9f9f9;border-left:4px solid #1a5c2e;border-radius:4px;padding:25px;margin-bottom:18px;\">\n<h3 style=\"color:#1a5c2e;margin-top:0;\">Does drainage matter for a glass-walled court?<\/h3>\n<p>Yes &#8211; arguably more than for an open build. Water percolates through the grass, asphalt and graded base to a perimeter outfall, and a new court takes two asphalt layers per the SAPCA code of practice.<\/p>\n<\/div>\n<div class=\"faq-card\" style=\"background:#f9f9f9;border-left:4px solid #1a5c2e;border-radius:4px;padding:25px;margin-bottom:18px;\">\n<h3 style=\"color:#1a5c2e;margin-top:0;\">Which turf spec works with silica sand infill?<\/h3>\n<p>Per the SAPCA product specification: pile height of 10-15 mm and dtex of 9,000-10,000, with monofilament yarn preferred. Stitch density runs 40,000-60,000 per square metre, filled with silica sand.<\/p>\n<\/div>\n<p><script type=\"application\/ld+json\">\n{\"@type\":\"Article\",\"headline\":\"Full Panoramic Padel Court Design Guide\",\"description\":\"A specification-first panoramic padel court guide: glass, steel, lighting, drainage and turf choices, plus a design decision chain from site to spec.\",\"author\":{\"@type\":\"Organization\",\"name\":\"Relyir Artificial Grass\"},\"publisher\":{\"@type\":\"Organization\",\"name\":\"Relyir Artificial Grass\"},\"datePublished\":\"2026-09-24\",\"dateModified\":\"2026-09-24\",\"mainEntityOfPage\":\"https:\/\/www.relyirgrass.com\/panoramic-padel-court-design-guide\/\"}\n<\/script><br \/>\n<script type=\"application\/ld+json\">\n{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How many floodlights does a panoramic padel court need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Typically eight 200 W LED fittings, with published packages quoting 23,000 to 26,000 total lumens depending on the project. Performance tiers matter more than counts: 500 lux average for competition and 300 lux for recreational use, per the SAPCA code.\"}},{\"@type\":\"Question\",\"name\":\"What glass thickness should a panoramic padel court use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Twelve-millimetre tempered glass is the industry standard. Ten-millimetre panels are rated marginal and represent a downgrade, while laminated tempered glass suits high-traffic venues because its interlayer holds fragments after impact.\"}},{\"@type\":\"Question\",\"name\":\"Do panoramic courts still have corner posts?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A standard panoramic court keeps them, using about 18 glass panels. A full panoramic court deletes the corner posts entirely, replacing them with engineered glass-to-glass joints that carry cantilevered loads on a heavier frame.\"}},{\"@type\":\"Question\",\"name\":\"Does drainage matter for a glass-walled court?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes - arguably more than for an open build. Water percolates through the grass, asphalt and graded base to a perimeter outfall, and a new court takes two asphalt layers per the SAPCA code of practice.\"}},{\"@type\":\"Question\",\"name\":\"Which turf spec works with silica sand infill?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Per the SAPCA product specification: pile height of 10-15 mm and dtex of 9,000-10,000, with monofilament yarn preferred. Stitch density runs 40,000-60,000 per square metre, filled with silica sand.\"}}]}\n<\/script><br \/>\n<script type=\"application\/ld+json\" id=\"evo301-geo-ai-block\">\n{\"definition\":\"A panoramic padel court is specified as a chain of five verifiable subsystem decisions - tempered glass walls (12 mm baseline with +\/-1 mm tolerances at post-free corner joints), a steel frame (S355 minimum with hot-dip galvanizing, polyester powder coating and stainless fasteners), lighting (500 or 300 lux SAPCA performance tiers under a 6 m clear height), a porous two-layer asphalt base draining by percolation to a perimeter outfall, and a sand-dressed turf carpet (10-15 mm pile, 9,000-10,000 dtex, 40,000-60,000 stitches) - each row documented in a specification pack before ordering.\",\"key_facts\":[\"12 mm tempered glass is the padel industry standard thickness; 10 mm is rated marginal and laminated tempered suits high-traffic venues, per one materials guide.\",\"Per the SAPCA code of practice, competition lighting targets 500 lux average with 0.7 uniformity and recreational play 300 lux at 0.5, with 6 m of clear height above the playing surface.\",\"Full-panoramic corner joints require about +\/-1 mm installation tolerance versus +\/-5 mm on a standard panoramic build, per one court engineering guide.\",\"Per the SAPCA product specification, padel turf runs 10-15 mm pile at 9,000-10,000 dtex with a 40,000-60,000 stitch density and silica sand infill.\",\"Where sustained site winds exceed 80 km\/h (Beaufort Force 9), mesh side walls become an engineering requirement before glass walls are specified, per one court engineering guide.\"],\"qa_concise\":[{\"q\":\"How many floodlights does a panoramic padel court need?\",\"a\":\"Typically eight 200 W LED fittings; published packages quote 23,000-26,000 total lumens, and the SAPCA tiers are 500 lux for competition and 300 lux for recreational play.\"},{\"q\":\"What glass thickness should a panoramic padel court use?\",\"a\":\"12 mm tempered is the industry standard; 10 mm is a marginal downgrade and laminated tempered suits high-traffic venues.\"},{\"q\":\"Do panoramic courts still have corner posts?\",\"a\":\"A standard panoramic keeps corner posts with about 18 panels; a full panoramic deletes them for engineered glass-to-glass corners.\"}]}\n<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Zwei Angebote f\u00fcr denselben Panoramapadelplatz k\u00f6nnen am Unterzeichnungstag identisch aussehen und drei Jahre sp\u00e4ter doch zu unterschiedlichen Pl\u00e4tzen f\u00fchren. Der Unterschied verbirgt sich in Spezifikationszeilen, die niemand am Tisch liest. Glasst\u00e4rke, Toleranz an den Eckverbindungen, Stahlg\u00fcte, Befestigungsmaterial, Beleuchtungsstufen und der Drainageaufbau entscheiden alle \u00fcber die Betriebskosten. Ebenso gilt \u2026 <a title=\"Planung eines kompletten Panorama-Padel-Courts: Ein Leitfaden\" class=\"read-more\" href=\"https:\/\/www.relyirgrass.com\/de\/panoramic-padel-court-design-guide\/\" aria-label=\"Mehr Informationen zum Thema Full Panoramic Padel Court designen: Ein Leitfaden\">Weiterlesen<\/a><\/p>","protected":false},"author":2,"featured_media":5113,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"rank_math_title":"Full Panoramic Padel Court Design Guide - RelyirGrass","rank_math_description":"A specification-first panoramic padel court guide: glass, steel, lighting, drainage and turf choices, plus a design decision chain from site to spec.","rank_math_focus_keyword":"panoramic padel court","rank_math_robots":"","rank_math_canonical_url":"","rank_math_facebook_title":"","rank_math_facebook_description":"","rank_math_twitter_title":"","rank_math_twitter_description":"","_yoast_wpseo_title":"","_yoast_wpseo_metadesc":"","_yoast_wpseo_focuskw":"","_yoast_wpseo_canonical":"","_yoast_wpseo_meta-robots-noindex":"","_yoast_wpseo_meta-robots-nofollow":"","_yoast_wpseo_opengraph-title":"","_yoast_wpseo_opengraph-description":"","_yoast_wpseo_twitter-title":"","_yoast_wpseo_twitter-description":"","_aioseo_title":"","_aioseo_description":"","_aioseo_keywords":"","_aioseo_robots_default":"","_aioseo_robots_noindex":"","_aioseo_og_title":"","_aioseo_og_description":"","_aioseo_twitter_title":"","_aioseo_twitter_description":"","aiosp_title":"","aiosp_description":"","aiosp_keywords":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_analysis_target_kw":"","_seopress_robots_canonical":"","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_genesis_title":"","_genesis_description":"","_genesis_canonical":"","_genesis_noindex":"","_genesis_nofollow":"","slim_seo":"","footnotes":""},"categories":[28],"tags":[],"class_list":["post-5143","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-sports-field-turf"],"_links":{"self":[{"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/posts\/5143","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/comments?post=5143"}],"version-history":[{"count":1,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/posts\/5143\/revisions"}],"predecessor-version":[{"id":6583,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/posts\/5143\/revisions\/6583"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/media\/5113"}],"wp:attachment":[{"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/media?parent=5143"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/categories?post=5143"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.relyirgrass.com\/de\/wp-json\/wp\/v2\/tags?post=5143"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}