Relyir Gras
Kunstgras ab Werk seit 2006 — vollständige Individualisierung, Muster und schnelle Angebote.
Kunstrasen-Systeme
25 mm sand-filled turf engineered for the fast-paced game of padel. Factory-direct from Relyir — 20 years of sports turf manufacturing.
Why Specify Short-Pile Sand-Filled Turf
Padel is the fastest-growing racket sport in the world, and artificial turf is the modern court standard. The surface must deliver low, predictable bounce, secure foot traction for rapid direction changes, and compatibility with the glass walls that define the game.
Padel’s defining feature is playing the ball off glass walls. The turf surface must produce a consistent, low bounce so players can anticipate where the ball will land after rebounding. Sand-filled short pile delivers that controlled response across the entire 20 × 10 m court.
Padel rallies involve rapid lateral movement, sudden stops and sprints to the net. The sand infill between fibers provides the grip players need without excessive rotational resistance — the surface holds the foot and releases it cleanly on every change of direction.
Modern padel courts are enclosed by glass walls and metal mesh. The turf must be cut and fitted precisely around the perimeter, with edges secured against the glass base rail. PP backing with optional PU coating provides the dimensional stability that glass-court fitting demands.
Produktsortiment
The Mesh Adventure 25 is Relyir’s padel court product — a 25 mm pile at 27,300 tufts/m² on 3/8″ gauge, sand-filled to approximately 15–25 kg/m² for the low, controlled bounce that padel demands. Professional padel courts often use 10–12 mm pile; the 25 mm system provides a slightly more cushioned playing surface suitable for club and recreational use.
| Modell | Florhöhe | Garn | Dichte | Drahtstärke | Reihenzahl | Trägergewebe | Farben |
|---|---|---|---|---|---|---|---|
| Mesh Adventure 25 | 25 mm | PP | 27.300 Knoten/m² | 3/8″ | 26/10 cm | PP + PP (PU optional) | Olivgrün / weiß |
Roll sizes: 4 × 25 m or 2 × 50 m, maximum roll width 5 m. Each padel court (20 × 10 m) requires approximately 200 m² of turf. Blue and green court colors available on request. Full datasheets are provided with your quotation.
Leistungsdesign
Padel is played in an enclosed space — 20 meters long, 10 meters wide, surrounded by glass panels and metal mesh on all four sides. The court surface must work in concert with those walls: the ball bounces off glass at speed and lands on the turf at unpredictable angles. Consistent, low-bounce turf is what makes those rebound plays possible.
The sand fill level is critical. Professional padel courts typically use 10–12 mm monofilament or curly turf with 15–25 kg/m² of silica sand. The 25 mm Mesh Adventure system, sand-filled to a similar loading, provides a slightly more cushioned alternative that suits club and recreational play while maintaining the low, controlled bounce that defines padel’s character.
Color matters more in padel than most sports. Blue and green courts dominate the professional circuit, and club operators often match court color to their facility branding. The turf’s color fastness under UV exposure is essential because padel courts are predominantly outdoor and uncovered.
The court edges present a unique installation challenge. Turf must be cut precisely and secured against the glass base rail so that balls cannot wedge between the surface and the wall. PU backing adds dimensional stability that helps the carpet hold its shape during and after perimeter fitting.
For multi-court padel projects, Relyir supplies matched-lot turf with consistent color across all courts and provides installation guidance for glass-wall perimeter detailing.
Factory Direct from Jiangsu
Relyir stellt seit 2006 Kunstrasen in Jiangsu her. Jeder Schritt – vom rohen PE-Granulat bis zur fertigen Rolle – läuft vor Ort, so kontrollieren wir die Qualität und halten die Preise 30–50% unter internationalen Vergleichsprodukten.
Alle acht Produktionsstufen werden vor Ort verwaltet, was die Qualitätslücken beseitigt, die entstehen, wenn Compoundierung, Florverlegung und Beschichtung in verschiedenen Anlagen erfolgen. Die 2015 in Betrieb genommene automatisierte Sportkunstrasenlinie erhöhte die Produktionskapazität um 150% und stärkte die Konsistenz bei Großaufträgen.
Anpassung ist in die Linie eingebaut: Faserdichte, Florhöhe und Faserfarben werden an die Projektspezifikation angepasst, mit PP + Netz- und PU-Rückseiten-Optionen. Das Exportteam hat seit 2009 an über 500 Kunden in 50+ Länder geliefert und bearbeitet alle Dokumentationen – von Rechnungen bis zu Ursprungszeugnissen.
Systemaufbau
Padel court installation follows a straightforward sequence — a concrete or asphalt base, the turf carpet bonded in place, sand infill brushed in, and white lines inlaid. We supply the turf and share build-up guidance with every project.
A smooth, sloped slab with perimeter drainage — the foundation for the court. Padel courts require tight levelness tolerances because the ball bounces low and any irregularity magnifies.
The carpet is glued to the base and trimmed precisely against the glass base rail. Seams are bonded for a flush, continuous surface with no visible joints in the playing area.
Silica sand at approximately 15–25 kg/m² is brushed into the pile. The sand supports fibers, controls ball bounce and provides the foot traction padel demands.
White court lines are inlaid to the 20 × 10 m padel dimensions, with service zones marked. Glass panels and mesh are then fitted around the court perimeter.
Padel court edges are the highest-maintenance zone. Balls travel along the glass at speed, and sand can accumulate against the wall base or escape through gaps in the perimeter seal. Precise cutting and secure bonding of the turf edge against the glass rail prevent sand loss and keep the playing surface consistent.
Regular brushing redistributes sand from the court edges and service zones back to the center. Perforated backing ensures rain drains through quickly on outdoor courts, and UV-stabilized fibers resist fading under continuous sun exposure.
Professional padel courts (World Padel Tour style) typically use 10–12 mm monofilament or curly turf. The Relyir Mesh Adventure at 25 mm, sand-filled, provides a slightly more cushioned surface suited to club and recreational play. Both approaches deliver the low, controlled bounce padel requires — the choice depends on your target player level and budget.
A standard padel court is 20 × 10 m (200 m²). Accounting for cutting waste around the glass perimeter and service zones, plan approximately 220–240 m² of turf per court. Rolls are 4 × 25 m (100 m² each), so two to three rolls cover one court depending on layout optimization.
Yes. The turf is cut and bonded against the glass base rail during installation. PU backing is recommended for glass-court projects because it adds dimensional stability that helps the carpet maintain a tight fit against the perimeter through temperature changes and foot traffic.
Standardfarben sind Olivgrün und Weiß. Blau und andere individuelle Platzfarben sind auf Anfrage erhältlich – bitte in der Angebotsphase angeben, damit das Produktionsteam den Färbelauf planen kann. Individuelle Farben sind besonders bei Mehrplatzanlagen und Installationen mit Club-Branding beliebt.
Eine Sandeinschüttung von 15–25 kg/m² stützt die Fasern, reguliert die Absprunghöhe des Balls und bietet Trittsicherheit. Mehr Sand führt zu einer etwas langsameren, kontrollierteren Oberfläche; weniger Sand lässt den Ball schneller gleiten. Vereinsbetreiber können die Sandboxtiefe bei der Wartung feinjustieren, um den Vorlieben ihrer Spieler Rechnung zu tragen.
Regelmäßiges Bürsten zum Umverteilen des Sands von den Rändern und Ecken, periodisches Nachfüllen des Sands, da mit der Zeit Material verloren geht, sowie Reinigung zur Verhinderung von Algen- oder Mooswachstum in feuchtem Klima. Bei Außenplätzen ist es sinnvoll, die Umrandungsdichtungen am Glasgeländer zu überprüfen, um Sandaustritt zu verhindern. Relyir liefert mit jeder Bestellung Wartungshinweise.
Senden Sie uns die Anzahl Ihrer Plätze, Ihre Farbwünsche, Details zum Glas-System und Ihren Zielzeitrahmen. Unser Exportteam antwortet innerhalb von 12 Stunden mit Modellempfehlungen, Spezifikationsblättern und direkten Werkspreisen.
Kostenloses Angebot anfordern
German 
English 
Arabic 
French 
Portuguese 
Russian 
Spanish