Systèmes de pelouse de sport

Pelouse de gymnase

12 mm dense turf for gym flooring, sled lanes and functional training areas. Factory-direct from Relyir since 2006.

12 mm de hauteur de poil Fil bouclé 52,500 tufts/m² Épaisseur de 3/16″
Depuis 2006 · 20 ans de fabrication
50+ pays · 500+ clients
12 000 m² usine au Jiangsu
Turf de gymnase — Gazon synthétique Relyir

Why Specify Dense Short-Pile Turf for Gyms

The Flooring That Bridges Sleds and Burpees

Modern functional fitness gyms need a surface that handles extreme abuse — weighted sleds, dropped barbells, sprint intervals — while remaining comfortable for burpees, lunges and floor exercises. Artificial grass bridges this gap where rubber tiles and bare concrete fall short.

Withstand Weighted Sled Drag

Sled push and pull exercises drag hundreds of kilograms across the surface. Flat Curly Tenacity 12 at 52,500 tufts/m² resists fiber tearing and matting under this load, maintaining a smooth track session after session.

Cushioned for Floor Work

The same turf that handles a loaded sled also cushions hands and knees during burpees, planks and crawling drills. The 12 mm pile over a rubber underlay delivers the balance of firmness and give that bodyweight exercises require.

Professional Gym Aesthetics

Gym turf zones define functional training areas visually and create a professional look that sets the facility apart. Distance markings and gym logos can be tufted directly into the carpet during production for branded training zones.

Gamme de produits

Dense Short-Pile System for Gym Floors

Gym turf needs maximum density at minimal pile height to handle sled abuse while staying comfortable for bodyweight exercises. Flat Curly Tenacity 12 is the primary gym product.

Modèle Hauteur de pile Fil Densité Jauge Taux de couture Support Couleurs
Flat Curly Tenacity 12 12 mm Monofilament PE 52,500 tufts/m² 3/16″ 25/10 cm PP + non-woven + PP (PU optional) Vert de champ

Roll sizes: 4 × 25 m or 2 × 25 m, maximum roll width 5 m. Distance markings and gym logos can be tufted on request. Full datasheets — including yarn weight and total weight — are provided with your quotation.

Conception performante

Why Gym Flooring Needs a New Approach

Traditional gym flooring forces a compromise. Rubber tiles handle dropped weights but shred under sled friction. Bare concrete handles sleds but destroys joints and creates noise. Foam mats cushion bodyweight work but tear under equipment drag. Gym turf eliminates this compromise by delivering all three requirements from a single surface.

The 12 mm pile of Flat Curly Tenacity 12 sits at the intersection of durability and comfort. At 52,500 tufts/m², the fiber density distributes sled-runner abrasion across thousands of contact points — preventing the wear channels that form in less dense products after weeks of heavy sled training.

At the same time, the short pile and PE monofilament construction create a surface that cushions hands, knees and elbows during floor exercises without being so soft that it destabilizes standing lifts or sprint starts.

Installation uses PU adhesive to bond the turf to a clean concrete subfloor, and the optional PU backing upgrade adds moisture resistance for facilities that mop frequently. No infill is used, keeping the surface clean and eliminating the bacteria-trapping granules that create odor issues in gym environments.

Rubber tiles handle dropped weights but shred under sled friction. Bare concrete handles sleds but destroys joints. Gym turf bridges both needs — durable enough for loaded sleds, forgiving enough for bodyweight movements.

For gym chains outfitting multiple locations, the consistency of factory-direct supply means every facility gets the same pile height, density and color — roll after roll, order after order.

Vente directe d'usine depuis le Jiangsu

Huit étapes de production sous un même toit

Relyir fabrique du gazon artificiel au Jiangsu depuis 2006. Chaque étape — des granulés de PE bruts aux rouleaux finis — se déroule sur place, ce qui nous permet de contrôler la qualité et de maintenir des prix inférieurs de 30–50% aux équivalents internationaux.

Les huit étapes de production sont gérées en interne, éliminant les écarts de qualité qui surviennent lorsque le mélangeage, le tissage en boucles et le revêtement sont effectués dans des installations séparées. La ligne automatique de gazon sportif, mise en service en 2015, a augmenté la capacité de production de 150% et renforcé la cohérence sur les commandes de gros volumes.

La personnalisation est intégrée à la ligne : la densité de filaments, la hauteur de la pile et les couleurs des fibres sont ajustées selon la spécification de chaque projet, avec des options de dos PP + filet et PU. L'équipe export a expédié à plus de 500 clients dans plus de 50 pays depuis 2009 et gère toute la documentation — des factures commerciales aux certificats d'origine.

  • 20 ans de fabrication depuis la fondation en 2006.
  • Site de 12 000 m² — entrepôt et atelier sous un même système de qualité.
  • Ligne sportive automatique mise en service en 2015, capacité +150%.
  • Assistance export complète — documentation, échantillonnage et coordination logistique.
Demander un tarif usine
Relyir artificial grass production facility
1 Mélange 2 Extrusion 3 Torsion 4 Piquage 5 Enrobage 6 Séchage 7 Perçage 8 Enroulage

Montage du système

Four Steps to a Gym Training Surface

Gym turf installation is straightforward — bond to a clean concrete floor and secure the edges. The simplicity of the system is part of its appeal for gym operators.

1

Concrete Subfloor Prep

Clean, dry, level concrete. Any cracks or uneven areas are filled and ground smooth before installation. Subfloor condition directly affects adhesion and sled travel.

2

Rubber Underlay (Optional)

A thin rubber or foam pad adds impact absorption for plyometric exercises and reduces noise transmission to spaces below the gym floor.

3

Full-Bond Adhesion

PU adhesive bonds the turf to the subfloor across the entire area, preventing shifting under sled loads and lateral foot forces during training.

4

Edge Securing and Finishing

Perimeter edges are secured with adhesive and transition strips at junctions with rubber flooring or other gym surfaces. Distance markings complete the installation.

Installation de turf de gymnase montrant le détail de la bordure et les marquages de distance

The Gym Flooring That Does It All

Our Flat Curly Tenacity 12 at 52,500 tufts/m² delivers the density to handle daily sled work while remaining comfortable for bodyweight movements. The no-infill installation keeps the facility clean and easy to maintain between sessions.

  • 52,500 tufts/m² density resists sled drag wear
  • No-infill system for easy cleaning and hygiene
  • PU backing bonds securely to gym subfloors

Questions 44

Gym Turf FAQ

Straight answers to the questions we hear most often from gym operators, CrossFit affiliates and fitness flooring distributors.

Vous ne trouvez pas votre réponse ?

Notre équipe technique répond sous 12 heures.

Posez-nous votre question directement
Can gym turf handle weighted sled training?

Yes. Flat Curly Tenacity 12 at 52,500 tufts/m² is specifically designed for high-wear applications including sled push and pull. The dense, short pile resists tearing and matting under heavy loads. For dedicated sled lanes, see our sled turf page.

Is gym turf comfortable for floor exercises?

Yes. The 12 mm pile provides cushioning for burpees, planks and crawling exercises without being so soft that it destabilizes standing lifts. For areas where extra cushion is preferred, a rubber underlay can be added beneath the turf.

How do we maintain gym turf?

Regular vacuuming or sweeping for dust and debris. Occasional damp mopping for sweat and spills. The no-infill system means there is no rubber granule to redistribute or replace — maintenance is comparable to rubber gym flooring.

Can we install gym turf ourselves?

Yes. Installation requires a clean concrete subfloor, PU adhesive and seam tape. Rolls are laid out, trimmed to fit, seams taped and glued, and perimeter edges secured. We provide installation guidance with every order.

Can we add gym branding to the turf?

Yes. Distance markings, measurement lines and gym logos can be tufted directly into the carpet during production. This is a popular option for CrossFit affiliates and commercial gym chains that want branded training zones.

What roll sizes are available for gym projects?

Standard rolls are 4 × 25 m or 2 × 25 m with a maximum width of 5 m. Custom widths and lengths can be arranged for specific gym layouts. Full datasheets are provided with your quotation.

Ready to Price Your Gym Turf?

Envoyez les dimensions de votre zone d'entraînement et votre plan d'utilisation. Notre équipe d'exportation vous répond avec des recommandations de modèles, des fiches techniques et des tarifs directs usine sous 12 heures.

Obtenir un devis gratuit
Depuis 2006 Plus de 50 pays Plus de 500 clients Usine de 12 000 m²
Retour en haut
fr_FRFrench
Besoin d'un devis rapide ? Discutez avec notre équipe d'exportation sur WhatsApp.