Relyir Grass
Factory-direct artificial grass since 2006 — full customization, samples and fast quotes.
Putting Green Systems
Pre-cut 15 mm putting green kit with all components for DIY installation. Factory-direct from Relyir — 20 years of manufacturing.
The Kit Advantage
A putting green kit removes the guesswork from sourcing. Instead of ordering turf, seam tape, adhesive, cups, sand and tools from separate suppliers, one shipment arrives with every component matched and ready for assembly.
Each kit is cut at the factory to the dimensions you specify. Panels arrive labeled and sequenced, so the installer — whether a contractor or a homeowner — follows a clear assembly sequence without measuring or cutting on-site.
Seam adhesive, seam tape, cup inserts and infill sand quantities are calculated for your specific green size. No surplus materials, no shortages mid-installation. The kit arrives as a complete system, not a collection of parts.
Every kit ships with a step-by-step installation guide covering base preparation, panel layout, seaming technique and infill application. For DIY projects, this documentation replaces the need for a specialist consultant on-site.
Product Range
Kits are where most golfers meet artificial turf: a hitting mat or swing pad that lives in a garage or spare room. Dense, low-pile surfaces that take repeated strikes and roll predictably on a hard floor.
Practice line
All-Weather Golf Hitting Mat
Made to order
Learn More
Practice line
Balcony Swing Golf Practice Pad
Made to order
Learn More
Practice line
Durable Golf Swing Pad
Made to order
Learn More
Practice line
Mini Carrying Golf Swing Pad
Made to order
Learn More
Practice line
Office Relax Golf Swing Trainer
Made to order
Learn More
Practice line
Swing Flex Pad
Made to order
Learn More
Project Simplification
The most common barrier to installing a backyard or commercial putting green is not cost — it is coordination. Sourcing turf from one supplier, seam materials from another, cups from a third, and then hoping everything arrives compatible and on schedule adds weeks of project management overhead.
A Relyir putting green kit consolidates that chain into a single order. You specify the green dimensions, hole count and turf variant; we calculate panel sizes, seam lengths, adhesive volume and infill quantities. Everything ships in one container, labeled and sequenced for installation.
For contractors, the kit reduces on-site time and eliminates material waste. For homeowners tackling a DIY install, it removes the need to research and source specialized materials — the only locally purchased items are base aggregate and silica sand, both available from any building supply yard.
Kit configurations range from compact 3 × 4 m single-hole practice greens to 10 × 15 m multi-hole setups with fringe borders. Each kit can include optional add-ons: weighted cup bases for hard-surface installs, extra seam tape for complex panel layouts, and replacement fiber samples for future repair.
For distributors and resellers, kits are a strong retail product. The pre-packaged format allows you to stock standardized sizes and sell a complete solution to end users, rather than quoting each component separately. We provide white-label packaging options on request.
Factory Direct from Jiangsu
Relyir has manufactured artificial grass in Jiangsu since 2006. Kit assembly happens on-site after production, ensuring every component meets the same quality standard.
All eight production stages are managed in-house. The automated sports turf line, commissioned in 2015, lifted production capacity by 150%. Kit assembly — cutting, labeling, component matching and packaging — runs in the same facility, so the turf and accessories leave the factory as a verified, complete system.
For distributors ordering multiple kits, we provide standardized sizing and branding options. The export team has shipped to more than 500 customers across 50+ countries since 2009 and handles all documentation — from commercial invoices to certificates of origin.
Every order is produced to specification — pile height, density, blade shape and color, backing composition and roll dimensions are all configured to your project requirements.
Kit Assembly Guide
The kit is designed for a straightforward installation. Two people with basic tools can complete a standard backyard kit in one to two days, including base preparation.
Excavate the area to 80–120 mm depth. Fill with compacted crushed aggregate and level. Lay geotextile weed barrier over the compacted base. This is the only step that uses locally sourced materials.
Unroll the pre-cut panels according to the included layout diagram. Panels are labeled to match their position in the green. Arrange them in place before applying any adhesive.
Apply the included seam tape and adhesive between panels. Press seams firmly and secure the perimeter with nails or edge adhesive. Cut cup holes at pre-marked positions.
Spread locally sourced fine silica sand (2–5 kg/m²) over the surface and brush it into the pile. Insert cups and flagsticks. The green is ready for practice immediately after brushing.
The kit includes all specialized materials. The installer provides standard tools: utility knife, measuring tape, stiff broom, wheelbarrow, shovel and a plate compactor (for base preparation). No specialized turf equipment is required.
The included installation guide walks through each step with diagrams and tips. For questions during installation, our support team is available to advise remotely — send photos and we respond with guidance within hours.
DIY kits package the components that a professional install would specify: pre-cut green and fringe turf, cups, flags, seaming material and fixing hardware, with the base left to the owner. Industry guides consistently emphasize the same point — the base makes the green: a 2–4 inch compacted aggregate layer, shaped before the turf ever arrives, determines both drainage and roll quality. The kit supplies the surfaces; the prep supplies the performance.
Clear and level the area, then install a compacted gravel base — commonly 2 to 4 inches of crushed stone — shaped to your contours. The turf is laid, seamed and dressed on top of that base.
Yes, if you order from the same production batch or keep spare material from the original kit, because dye lots vary between batches. Tell us your possible future layout and we will flag which components are worth buying once, up front.
The kit includes pre-cut turf panels, seam tape, adhesive, cup inserts and an installation guide. You need to source locally: crushed aggregate for the base, geotextile weed barrier, and fine silica sand for infill. These are available from any building supply or landscaping yard.
Yes. The kit is designed for DIY installation by two people with basic tools. The most physically demanding step is base preparation (excavation and compaction). If your site has complex contours or drainage challenges, a local contractor may be helpful for that phase.
Standard sizes include 3 × 4 m, 4 × 6 m and 6 × 10 m. Custom dimensions are available on request. Each size can be configured with one to six cup positions depending on the green area.
Yes. We offer standardized kit sizes with white-label packaging options for distributors and resellers. Minimum order quantities and pricing tiers are provided on request. The pre-packaged format is designed for retail shelf or warehouse fulfillment.
Standard-size kits ship within 15–20 days of order confirmation. Custom-dimension kits may require 20–30 days depending on complexity. Shipping time depends on destination — our export team provides transit estimates with every quotation.
Yes. Samples are free of charge — you only cover the shipping. Standard swatches are 20 × 20 cm and we typically send three to four models per project so you can compare pile heights and colors side by side. Standard samples ship via DHL or FedEx within 4–6 days; custom-matched samples add 10–15 days of production.
Yes. Choose between two options: delivered to your destination port, with export customs clearance in China, international ocean freight and cargo insurance included in one all-inclusive cost; or delivered to a Chinese port if you prefer to work with your own freight forwarder. Other delivery arrangements can be accommodated on request.
Orders range from single rolls for smaller installations to full container loads for large developments. Roll sizes of 2 m, 4 m and 5 m widths (25 m length) cover most layouts, and custom dimensions are produced to order. Volume pricing applies as order size increases.
Whether you are a homeowner planning a DIY project or a distributor looking to stock kits, send us your requirements. Our team replies with specifications, pricing and lead time within 12 hours — typically 30–50% below international equivalents..
English 
Arabic 
French 
German 
Portuguese 
Russian 
Spanish