Relyir Grass
Factory-direct artificial grass since 2006 — full customization, samples and fast quotes.
Sports Turf Systems
50 mm outfield turf with short-pile infield options for softball diamonds and training facilities. Factory-direct from Relyir since 2006.
Why Specify a Dual-Zone System
Softball’s shorter pitching distance and smaller field dimensions compress reaction times. Ground balls reach infielders faster, outfield coverage areas are tighter, and every surface inconsistency magnifies. Relyir’s two-product system addresses each zone’s distinct ball-response requirement.
Softball’s 60-foot pitching distance means ground balls travel less turf before reaching a glove. The 50 mm outfield pile, stabilized with sand and rubber infill, keeps ball roll predictable across that shorter but faster trajectory — no dead spots or unexpected hops.
Fastpitch double plays demand rapid ball transfers at second base. The 12 mm short-pile infield turf at 52,500 tufts/m² provides the firm, fast surface fielders need to field cleanly and release quickly under time pressure.
Softball sliding — especially in fastpitch — concentrates abrasion at each base. Dense PE monofilament fibers and reinforced three-layer backing resist the fiber pull and infill displacement that repeated head-first and feet-first slides create.
Product Range
Softball is not baseball with a smaller field: the 11-inch ball, shorter base paths and slap-hit technique change what the surface has to do.
Every Relyir surface is extruded, tufted and coated in our own plant, so the specification above is a starting point, not a catalogue limit. Send us your sport, level of play and sub-base and we will engineer the pile height, gauge, yarn, backing and infill around it.
Request a QuotePerformance Design
Softball compresses every dimension of the game. The pitching rubber sits 43 feet from the plate in fastpitch — roughly 17 feet closer than baseball’s mound. Base paths are 60 feet, not 90. Outfield fences are closer. The result is a faster game where surface imperfections become more consequential, not less.
A ground ball hit up the middle reaches the shortstop in a fraction of a second. That ball must track true — no hop, no deviation — or the play is lost. The 50 mm outfield turf, stabilized with a sand and rubber infill column, holds fibers upright and provides the consistent ball-roll surface that fast-twitch defense demands.
In the infield, the challenge reverses. Fielders need a surface that plays fast — low bounce, quick response — so they can field cleanly and transfer the ball in one fluid motion. Our made-to-order infield turf — specified at the pile height and density your level of play needs, sand-filled — delivers that quick-release behavior at every infield position.
The transition between outfield and infield turf is a critical installation detail. Seams must be flush and secure — any lip between the two pile heights will disrupt ball behavior at the worst possible moment. Relyir supplies both products with compatible backing systems and provides seam guidance for the transition zones.
For projects referencing WBSC field guidelines, Relyir provides full specification documentation and coordinates with your installer on zone layout and ball-response targets.
Factory Direct from Jiangsu
Relyir has manufactured artificial grass in Jiangsu since 2006. Every step — from raw PE pellets to finished rolls — runs on-site, which is how we control quality and hold pricing 30–50% below international equivalents.
All eight production stages are managed in-house, eliminating the quality gaps that arise when compounding, tufting and coating happen in separate facilities. The automated sports turf line, commissioned in 2015, lifted production capacity by 150% and tightened consistency across high-volume orders.
Customization is built into the line: blade density, pile height and fiber colors are adjusted to each project’s specification, with PP + net and PU backing options. The export team has shipped to more than 500 customers across 50+ countries since 2009 and handles all documentation — from commercial invoices to certificates of origin.
Every order is produced to specification — pile height, density, blade shape and color, backing composition and roll dimensions are all configured to your project requirements.
System Build-Up
The turf roll is one component of a four-layer system. We supply both outfield and infield turf and share build-up guidance so installers achieve the ball-response values specified at design stage.
Compacted aggregate or asphalt with engineered drainage — the foundation that supports both outfield and infield zones, with separate sub-base preparation where dirt cutouts are planned.
Silica sand brushed into the pile — 20–30 kg/m² in the outfield, adjusted for the short-pile infield to maintain the fast surface response softball fielders need.
SBR, TPE, EPDM or organic (cork) at 8–15 kg/m² in the outfield; infield zones use sand-only infill or minimal rubber for a quicker surface.
Optional elastic layer for projects that double as multi-sport facilities or require additional impact absorption beneath both zones.
Softball’s compressed field dimensions mean zone transitions are closer together, and every seam sits within a player’s immediate field of play. Flush transitions between the 50 mm outfield and 12 mm infield are essential for ball behavior and player safety.
Base areas and sliding zones require particular attention during maintenance. Regular infill redistribution around bases prevents the bare spots that develop from repeated sliding, and UV-stabilized PE fibers maintain their structural integrity through seasons of play in all climates.
Softball compresses baseball’s demands into a smaller, faster field: skinned infield areas, base paths and the outfield all see different wear, and the shortened diamond means batted balls arrive harder, making a consistent hop the safety issue as much as a gameplay one. Synthetic surfaces keep the infield playable immediately after rain and stop the mud-cycle that regrades natural diamonds need after every storm.
Yes — infield-only conversion is a popular first step. The skinned areas and base paths are where mud and bad hops cost the most, and those zones convert cleanly to dense short-pile turf while the outfield stays natural.
A uniform, dense surface produces predictable hops on hard-hit balls and quick, clean plays through the infield. Facilities consistently report fewer bad-hop situations than on skinned dirt.
The turf products are the same — both sports use a two-zone system of 50 mm outfield and 12 mm infield. The difference is in field dimensions: softball outfields are shorter, base paths are 60 feet, and the pitching distance is 43 feet in fastpitch. These tighter dimensions make surface consistency even more critical because ball reaction times are compressed.
Yes. Both formats use the same 60-foot base paths. The main difference is pitching distance (43 feet for fastpitch, 50 feet for slowpitch) and fence distances. Line markings for both formats can be tufted into the outfield carpet during production, or removable paint can be applied after installation.
Both configurations work. Clay cutouts at the pitcher’s circle and bases give a traditional feel preferred at competitive levels. Full-turf infields using clay-colored short-pile turf minimize maintenance and are common at recreational and school facilities. Relyir supplies the turf for either approach.
The pitcher’s circle can be a clay cutout, a clay-colored turf insert, or the same 12 mm infield turf in a contrasting color. Each option installs with the same backing and seam system. We recommend discussing the approach with your installer to match the competition level and maintenance capacity of your facility.
Standard rolls are 4 × 25 m or 2 × 25 m with a maximum width of 5 m. Foul lines, base-path markings and team logos can be tufted into the carpet during production. Custom colors for warning track and infield zones are available on request.
Plan regular brushing in both zones, extra infill redistribution around bases where sliding displaces material, and periodic seam inspections at zone transitions. Relyir provides maintenance guidance with every installation package so the field holds its playing characteristics through its service life.
Yes. Samples are free of charge — you only cover the shipping. Standard swatches are 20 × 20 cm and we typically send three to four models per project so you can compare pile heights and colors side by side. Standard samples ship via DHL or FedEx within 4–6 days; custom-matched samples add 10–15 days of production.
Yes. Choose between two options: delivered to your destination port, with export customs clearance in China, international ocean freight and cargo insurance included in one all-inclusive cost; or delivered to a Chinese port if you prefer to work with your own freight forwarder. Other delivery arrangements can be accommodated on request.
Orders range from single rolls for smaller installations to full container loads for large developments. Roll sizes of 2 m, 4 m and 5 m widths (25 m length) cover most layouts, and custom dimensions are produced to order. Volume pricing applies as order size increases.
Send your field dimensions, zone layout and target timeline. Our export team replies with model recommendations, specification sheets and factory-direct pricing within 12 hours — typically 30–50% below international equivalents..
English 
Arabic 
French 
German 
Portuguese 
Russian 
Spanish